highEndguy
New member
- Thread Author
- #21
Super cool
New from arc the sp20
- Thread starter highEndguy
- Start date
Super cool
On first reading of the model designation, it immediately brought chills down my spine.
I still have the SP-10 and SP-11, classic two chassis preamps from ARC and I thought they were resurrecting them ( 2 piece full function preamps ).
Thanks for the heads up! I should be able to sleep well for now.
For what it's worth, I still use my SP-10 as Phono stage into a Ref 40 Anniversary (side by side with a Ref Phono 2 SE ) Great phono section after all these years.
highEndguy
New member
- Thread Author
- #23
From ARC :
The look is reminiscent of classic Audio Research components, but is totally modern with a clean, purposeful esthetic. The front panel sports a new 4.3” LCD touchscreen, with two large rotary knobs on either side. For the first time ever on an Audio Research preamp, there is a 1⁄4” headphone jack, accompanied by three buttons for Power, Mute, and Speaker off.
Those large knobs rotate fully, are optically-coupled and speed sensitive; turn it slowly and the volume will change incrementally; a quick turn one way or the other will raise or lower the volume by a large amount. Also for the first time, the Input selector is on the left, the Volume control is on the right.
Through the touchscreen one can change Inputs, select Stereo or Mono, Mute, adjust Phase, adjust left-right Balance, and adjust the phono input Load (50, 100, 500, 1000 or 47k Ohms). Through a Settings menu, you can customize other items: change input names, adjust gain offset for each input, change volume presets, adjust display brightness (or turn off), and check Tube Hours (or reset). When the tube hour meter reaches 4,000 hours, the Settings icon will turn red to warn the owner it is time to change the tubes.
In addition to the Phono input, there are four other single-ended inputs, two balanced inputs, separate Monitor-in and Record-out, and two pairs of balanced outputs. There is also an RS-232 port, IR-input, 12V trigger, and a 15A IEC connector. The SE4 input can be configured as a home theater pass-though.
The SP20 is fully balanced, pure Class-A with zero feedback. There are seven levels of voltage regulation, a large power supply, and a very low-noise R-core power transformer. Both the line and phono stages feature low-noise JFET inputs and 6H30
(2 per section) outputs. The latest high performance coupling and bypass capacitors are used in both stages. Bandwidth is extraordinary: Line -3dB 0.8Hz – 220kHz, Phono
+/- 0.4dB 5Hz—80Hz. Gain of the line section is 13.8dB (BAL), and gain of the phono section is 58dB, so the SP20 can be used with a wide variety of phono cartridges, including moderately low output moving coils.
MSRP 9,000
The look is reminiscent of classic Audio Research components, but is totally modern with a clean, purposeful esthetic. The front panel sports a new 4.3” LCD touchscreen, with two large rotary knobs on either side. For the first time ever on an Audio Research preamp, there is a 1⁄4” headphone jack, accompanied by three buttons for Power, Mute, and Speaker off.
Those large knobs rotate fully, are optically-coupled and speed sensitive; turn it slowly and the volume will change incrementally; a quick turn one way or the other will raise or lower the volume by a large amount. Also for the first time, the Input selector is on the left, the Volume control is on the right.
Through the touchscreen one can change Inputs, select Stereo or Mono, Mute, adjust Phase, adjust left-right Balance, and adjust the phono input Load (50, 100, 500, 1000 or 47k Ohms). Through a Settings menu, you can customize other items: change input names, adjust gain offset for each input, change volume presets, adjust display brightness (or turn off), and check Tube Hours (or reset). When the tube hour meter reaches 4,000 hours, the Settings icon will turn red to warn the owner it is time to change the tubes.
In addition to the Phono input, there are four other single-ended inputs, two balanced inputs, separate Monitor-in and Record-out, and two pairs of balanced outputs. There is also an RS-232 port, IR-input, 12V trigger, and a 15A IEC connector. The SE4 input can be configured as a home theater pass-though.
The SP20 is fully balanced, pure Class-A with zero feedback. There are seven levels of voltage regulation, a large power supply, and a very low-noise R-core power transformer. Both the line and phono stages feature low-noise JFET inputs and 6H30
(2 per section) outputs. The latest high performance coupling and bypass capacitors are used in both stages. Bandwidth is extraordinary: Line -3dB 0.8Hz – 220kHz, Phono
+/- 0.4dB 5Hz—80Hz. Gain of the line section is 13.8dB (BAL), and gain of the phono section is 58dB, so the SP20 can be used with a wide variety of phono cartridges, including moderately low output moving coils.
MSRP 9,000