If you can open it up and look at the tubes that would help, but if I remember correctly it has four 6DJ8/6922 tubes—two for the phono section and two for the line-stage.
http://www.audibleillusions.com/products/l3-line-stage-preamplifier/l3-linestage-specifications/
http://www.thetubestore.com/Tubes/6922-E88CC-Tube-Types/6H23n-EB-6922
L3A TECHNICAL SPECIFICATIONS
Gain: 30dB, Tape & S/S Processor 0dB
Distortion: .10% at 1.5V rms, 20-20kHz, into 50kOhm. Less than .12% at 1V out 20-20kHz into IHF load
Frequency Response: Within +/-1dB 2Hz to 100kHz measured w 1-1 probe/50 kOhms,100pf
Signal to Noise: 90dB below 1.5V rms output wideband
Max Input: 9V rms
Signal Phase: Main Out-Inverting, Tape and S/S Processor-Non Inverting
Input Impedance: 50kOhm – all
Output Impedance: Main-1.2 kOhms Tape, S/S Processor-150 Ohms
Muting: 45 second warm-up and automatic brown-out protection
Tube Compliment: 2-6H23EB twin-triodes, graded & matched
Power Requirements: 115-125VAC, 60Hz 45 watt maximum. 6 foot IEC Line Cord-Supplied.
Optional 100, 220, 230, 240 50-60Hz transformers.
Dimensions: 19″W x 3.5″H standard rack mount
Chassis is 17″W x 11″D x 3″H
Power Supply, 6″W x 10″D x 5″H
Weight: 19.5 lbs, 24 lbs (shipping wt.)